Art. No. SC 1000 KNX
If you touch the second display area (G) with your finger, the display branches to the editing
mode for setting the switching time parameters (figure 112). At this point, it is possible set the
switching time itself as well as the weekdays of the switching time to enabled. To select or
deselect a weekday, you must briefly touch the corresponding day with your finger (
X
=
deselected,
>
= selected). Active switching times have to be assigned to at least one weekday
so that the channel commands of these switching times are executed.
If you touch the display area of the switching time for a long time (4.), the device displays a
keyboard in which the switching time within a range of 00:00 ... 23:59 can be edited(figure 113).
By pressing the "
>
"button in the keyboard, a new switching time can be included in the
configuration. By pressing the "
X
" button, the input is discarded without change and the
switching time parameter view is displayed again.
In the editing mode of a switching time, the assignment for the random or astro function can
also be influenced separate from each other. The random function is selected or deselected by
touching the word "random" (see page 230). Likewise, the assignment for the astro function
can also be selected or deselected by touching the word "astro" (see page 229).
The assignment for the astro function has 3 statuses: No assignment for the astro function ->
Display: "Astro
X
", assignment for the astro function to activate a lighting system -> Display:
"Astro Light
>
", assignment for the astro function to activate a shading system -> Display:
"Astro Blind
>
".
Figure 112: Example of editing mode of switching time parameters
Page 237 of 347
Software "Smart Control 501511"
Functional description
