Art. No. SC 1000 KNX
Number of the integer
digits
1...
5
...20
This parameter influences the values
entered via the keyboard. The
parameter specifies how many numbers
can be preset before the decimal point
via the keyboard and thus defines the
value range that can be preset in this
way.
This parameter is only visible when a
keyboard can be used.
Number of decimal
places
1...
2
...18
This parameter defines how many
places the status value has after the
decimal point in the display.
The following parameters are only visible for the function "Operating mode switchover,
internal"...
Displaying icon
Yes
No
An icon can be displayed in the lower
area of the channel display element
(setting: Yes). The displayed icon of the
operating mode switchover is
determined by the current operating
mode of the integrated room
temperature controller. Consequently,
the icon changes the display status
whenever a change-over to a different
operating mode takes place,
The icon can be omitted optionally in the
display (setting: no).
Displaying status text
Yes
No
A status text can be displayed optionally
below the text name, which visualises
different texts ("Comfort", "Standby",
"Night", "Frost/heat protection",
"Presence button") in the display
depending on the operating mode of the
integrated room temperature controller.
The following parameters are only visible for the function "Setpoint shift, internal"...
Displaying icon
Yes
No
An icon can be displayed in the lower
area of the channel display element
(setting: Yes). The setpoint shift icon is
static and preset. Consequently, the
icon does not change the display status.
The icon can be omitted optionally in the
display (setting: no).
Displaying status value
Yes
No
A status value can be displayed
optionally below the text name. The
status value displays the level of the
setpoint shift returned by the internal
room temperature controller in textual
form (-4...0...+4). The value of a level
Page 270 of 347
Software "Smart Control 501511"
Parameters
