Art. No. SC 1000 KNX
(C) Status icon (displays current controller operating mode)
Status elements
The display area contains different display elements (figure 44) that are influenced by ETS
parameters. A name can be assigned to each KNX channel in the ETS (A). This text name is
centred in the display element for display whereby controllable KNX functions are identified for
the user. The name should be selected in such a way that the user knows clearly which
operating mode is recalled after executing an operation on the controller (e.g. "Controller
comfort").
In addition, a status text (B) can be displayed below the name, which visualises different texts
("Comfort", "Standby", "Night", "Frost/heat protection", "Presence button") in the display
depending on the operating mode of the integrated room temperature controller. Once the
controller has accepted the operating mode selected and preset by the sensor surfaces as
valid, the display element displays a
>
immediately after the status text. In this way, the user
can identify whether the operating mode he desired was actually set. If
>
still does not appear
approx. 2 seconds after the last operation, the controller has not accepted the presetting
directly. It then normally works in an operating mode with a higher priority (e.g. window status or
KNX forced operating mode).
A symbol (C) can optionally be displayed in the lower display area. A parameter in the ETS
defines whether the status icon in the display element is used. The displayed icon of the
operating mode switchover is determined by the current operating mode of the integrated room
temperature controller (figure 45). Consequently, the icon changes the display status whenever
a change-over to a different operating mode takes place.
The status value and icon can be omitted optionally.
Figure 45: Status icons for the operating mode switchover
1
Icon for comfort
2
Icon for standby
3
Icon for night reduction
4
Icon for frost / heat protection
5
Icon for presence function
Objects
A channel of the function "operating mode switchover, internal" does not have its own
communication objects because only the room temperature controller integrated in the device is
activated. All status indications are updated by the controller.
Page 110 of 347
Software "Smart Control 501511"
Functional description
