Art. No. SC 1000 KNX
which are configured to the functions
"Operating mode switchover, internal" or
"Setpoint shift, internal". Alternatively, it
can also be assigned to every other
KNX channel.
Icon of function unit 3
Icon 3: Temperature
The "Temperature" icon is preassigned
to the third function unit. The project
planner can adjust the choice of icons
using this parameter from a collection of
20 icons according to the application.
Name of function unit 4
Scene
The fourth function unit is preassigned
to the function "Scenes". Consequently,
the name is also predefined. The project
planner can adapt both settings
according to the application. If the
standard settings are maintained,
function unit 4 is automatically assigned
KNX channels, which are configured to
the functions "Scene extension".
Alternatively, it can also be assigned to
every other KNX channel.
Icon of function unit 4
Icon 4: Scenes
The "Scenes" icon is preassigned to the
fourth function unit. The project planner
can adjust the choice of icons using this
parameter from a collection of 20 icons
according to the application.
Name of function unit 5
...
Name of function unit 8
Function unit 5
...
Function unit 8
The function units 5...8 can optionally be
enabled (see parameter "Number of
function units"). These function units can
be assigned to any KNX channels. This
parameter defines the function unit
name that, among others, is visible on
the function pages in the device display.
Function unit 5 is assigned automatically
to KNX channels configured to the
functions "1-byte value transmitter" or
"2-byte value transmitter".
The possible length of the text depends
on the set size of the letters or numbers
entered in the entry field and can vary. A
text with a maximum of 18 characters
can be entered.
Icon of function unit 5
...
Icon of function unit 8
no icon
Icon 1: Light
Icon 2: Venetian blind
Icon 3: Temperature
Icon 4: Scenes
Icon 5: Switching
Icon 6: Central
Icon 7: Multimedia
Icon 8: Ventilation
A display icon must be assigned to each
user-defined function unit (5...8). The
parameter "Icon..." provides a collection
of 20 icons for this purpose.
Icons can be assigned multiple times so
that different function units have the
same icon.
Page 252 of 347
Software "Smart Control 501511"
Parameters
