Jung J630D, Manual

Page: 179 / 316

J630D
5. Functions of the machine 26.7.02 173
transition. When the roughing cycle has finished, the final CD cycle is executed.
Continuous dressing is then deactivated during the finish-grinding cycle.
Setting CD mode
• Select the technology input screen (see section 5.5.5.1
“Reciprocating plunge grinding technology” on page 132, see section 5.5.5.2
“Creep-feed grinding technology (optional)” on page 133 or see section 5.5.11
“Z - Y reciprocating path grinding (optional)” on page 149).
Entering the technology data for CD mode
• Select a dressing technology (on the Dressing Technology screen).
• Enter your technology data in the CD line.
5.6.6 Selecting a geometry for face dressing
• Select the required face dressing option on the "Tool and geometry" screen
and press the "Face geometry" softkey.
PA31K only
Number of dres-
sing cycles with the
roughing diamond.
These are followed
by one dressing cy-
cle with the finis-
hing diamond.
X times roughing
diamond 1 times fi-
nishing diamond
and so on until the
roughing operation
is complete Infeed value
per dressing
cycle (inch) Creep-feed and
continuous-path
grinding only
Infeed speed (mm/
min) in the Y-axis.
For feeding in the
dressed value
Feed rate of the
active dressing dia-
mond inch /min