Jung J630D, Manual

Page: 108 / 316

J630D
102 26.7.02 5. Functions of the machine
• Press the "New" softkey if you want to create a "New grinding wheel" record.
• You can copy or delete grinding wheel records with the "Copy" and "Delete"
softkeys.
• Enter the data for the new grinding wheel in the "New grinding wheel" mask.
• The "Parameter grinding wheel" screen is displayed when you press the
"Selection OK" softkey in the grinding wheel management mask.
– The data of the selected grinding wheel and the active grinding wheel is dis-
played here. You can modify this data if necessary.
The value shown in the "Diameter" column is the diameter of the new
grinding wheel and not the active wheel diameter.
You must always enter number 401 for the "Tool type" parameter in
the "New grinding wheel" mask. This ensures that the grinding
wheel is calculated and compensated correctly.