Jung J630D, Manual

Page: 87 / 316

J630D
5. Functions of the machine 26.7.02 81
You can enlarge the scale to 2:1 by activating the check box at the bottom of the
screen. To reduce the scale to 1:1 again, simply deactivate the check box.
You can return to the original screen by pressing the "Simulation OFF/ON" soft-
key again..
5.1.4.4 Program overview
You can select a machining program on the program overview screen. It is active
if it appears above in the program overview.
• Press the "Program overview" softkey in the "Machine Jung" module.
Since the simulation function shows the actual motion, it must be
selected before the dressing program starts. If you select this func-
tion while the dressing program is running, the simulation will not be
displayed.