Jung J630D, Manual

Page: 109 / 316

J630D
5. Functions of the machine 26.7.02 103
The dressing datum is set once and does not change ("Actual = new" softkey).
It is not shifted parallel to the actual wheel width (B
act
) if values are entered in Z1
and Z2.
The wheel that is selected in the grinding wheel management mask
is not necessarily the same as the wheel that is active in the pro-
gram. You can make the "selected grinding wheel" the "active grin-
ding wheel" by pressing the "Start change" softkey here.
You can only change the actual value of the grinding wheel diameter
by pressing the "Actual = New" softkey.
Dressing datum
(25)
B
new
(23)
B
act.
(1)
Z1 (1)
Z2
The values in paren-
theses are examples
for face dressing