Jung J630D, Manual

Page: 74 / 316

J630D
68 26.7.02 4. Functional description of the operating modes
4.4.1.2 Program cycle interrupted during a dressing cycle
4.4.1.3 Cancelling a function
4.4.1.4 Measurement
To activate the measurement function
• Press the "Measurement" key during the program following which you want to
measure.
– "Measurement cycle is active" appears on the display when the program-
med end position is reached.
If you press key (Interrupt program cycle), (See section 3.2 “Machine
control unit” on page 51, position 26) during a dressing cycle and
then attempt to start a new program, a message will appear on the
display telling you to restart the dressing program (start dressing
program), (See section 3.2 “Machine control unit” on page 51, posi-
tion 35). Until you do so, you will not be able to continue machining
at the breakpoint and complete the program.
This operation is prevented by the control unit for safety reasons,
because the Y-compensation dimensions are re-calculated.
The ‘cancel function key‘ (See section 3.2 “Machine control unit” on
page 51, position 27) has a special meaning if you are dressing with
an MA65 (optional) or a diaform DG 5/1 grinding wheel profile dres-
ser (optional) See also chapters 5.6.7 / 5.6.8.
The 'measurement' function is not active for stationary plunge grin-
ding, creep-feed grinding or X-Y continuous path grinding. You can
activate this function for all other programs by pressing the 'Measu-
rement' key. See section 3.2 “Machine control unit” on page 51, posi-
tion 28.