Jung J630D, Manual

Page: 122 / 316

J630D
116 26.7.02 5. Functions of the machine
• Select "front wheel edge" using any of the arrow keys (see section 3.1 “Con-
trol unit” on page 47, position 8, 12, 14 or 18)
– The diamonds are calculated in relation to this wheel edge.
• Then change to the dressing tools box (various dressers are available as opti-
ons) by pressing the "END" key (tab key, see section 3.1 “Control unit” on
page 47, position D17).
• The active input field has a yellow background, while the numeric field inside it
for selecting the dressing tool has a blue background.
• Select the required dressing tool (PA 31K D7, D8, D9 or D10 Station1).
• Confirm your chosen dressing tool by pressing the "Select dia + station" soft-
key.
• Then probe the grinding wheel with the selected dressing tool (PA 31K D7, D8,
D9 or D10 Station1).
– In order to set a diamond in the U-axis, you must probe the circumference
of the grinding wheel with this diamond and press the "Set U-axis" softkey.
– In order to set a diamond in the W-axis, you must probe the front or back
edge of the grinding wheel with this diamond and press the "Set W-axis"
softkey.