Jung J630D, Manual

Page: 309 / 316

J630D
9. Maintenance / servicing / disposal 26.7.02 303
9.10 Disposal
General
All auxiliary materials and end products to which recourse is made during opera-
tion and disposal of the machine must themselves be disposed of in a proper and
environmentally compatible manner. In doing so, you should take account of the
potential hazards both to your personal health and to the environment. If you re-
quire further information, please consult the appropriate government or local bo-
dies (e.g. the Refuse Department of your District Authority).
9.10.1 Disposal of the machine
Draining
• Dispose of old coolants.
• Drain off the oil, collect it, segregate it into types and dispose of it.
• Remove and dispose of the coolants in the hydraulic-fluid cooler.
Electronic scrap
• Dismantle into main assemblies (transformers, pc boards, cables, etc.) and dis-
pose of in accordance with the relevant statutory and local requirements.
• Dispose of all old batteries.
Materials
• Segregate and dispose of metals, non-metals and composite and auxiliary ma-
terials.
All waste materials, and in particular coolants, oils and refrigerants,
must be disposed of in accordance with the relevant statutory and
local requirements (e.g. laws governing waste disposal).