Jung J630D, Manual

Page: 202 / 316

J630D
196 26.7.02 6. Dressers
Mounting the dresser
1 = Grinding wheel
2 = Diamaond block with dressing diamond
3 = Magnetic table
Adjusting the height of the dressing diamonds
• Carefully mount the diamonds in their respective diamond holders.
• Adjust the overall height of the diamond block + diamond.
– You must set the basic height (54 mm) + diamond radius for diamond nos.
1 and 2.
Example: 54 mm + 0.25 mm = 54.25 mm
The best way to set this value accurately is to use an optical setting device.
If you cannot set it exactly, you must reset the actual values again every
time you change the diamond.
• Mount the diamond holders in the diamond block with the correctly adjusted di-
amonds.
• Adjust diamond no. 3 only if you actually need to use it.
Mount the diamond block so that the dressing diamond can be posi-
tioned centrally underneath the grinding wheel in the X-axis (see dia-
gram below). Align the diamond block as accurately as possible in
the transverse position (Z-axis).
3
2
1
1
2
3