Jung J630D, Manual

Page: 127 / 316

J630D
5. Functions of the machine 26.7.02 121
5.5 Creating and modifying grinding programs
• You can select any machining area (1 - 9) for each grinding program. Programs
with different machining areas can be linked together in a batch program.
• You can grind up to 999 grooves or surfaces with the technology input for
"grooves or surfaces with regular spacing".
• You can optionally grind up to 40 grooves or surfaces with the technology input
for "grooves or surfaces with irregular spacing".
• If you change the geometry or technology data during a program cycle, you can
cause it to take effect immediately in the active program by pressing the "Write
act. data" softkey.
5.5.1 Grinding program functions
You can enter various general settings that are valid for all grinding programs with
"Program functions" in the "Grinding program" mask.
• Press the "Grinding program" softkey in the "Program Jung" module.
• Press the "Program functions" softkey.
• Select the required functions for your grinding programs here, then press the
"Write act. data" softkey.
Any changes you make to the program functions do not take effect
until you press the "Write act. data" softkey.