JR ProPo XG11, Operation Manual

Page: 92 / 124

90
▋ Device▋Select【DEVICE▋SELECT】
▋ ▋ Function▋Explanation
This screen is where various flight modes can be set, and where switch functions can be defined.
Further, channel output assignments can be made here.
▋ ▋ Setting▋Method
▋ ▋ For▋Helicopter
⿟ Flight Mode Switch (FLIGHT MODE) / Flight Mode Extension Switch (EXTRA)
Initially, the Flight Mode selection switch is allocated to “FMOD SW” - it can be re-allocated to
another switch if desired. Further, extra flight modes can be activated here. Initially these are
inhibited – with this function activated, two (2) extra flight modes can be added.
⿟ Device Select (DEVICE)
Here input devices (switches, levers and trim switches) can be linked to a particular channel. Select the device as
desired.
⿟ Selection of output (OUT)
Here the Output configuration of each channel can be specified.
INH: No output.
ACT: Allow output - standard.
GOV: Use this channel for controlling the Governor.
※ The settings for the “GOVERNOR” can be set under the function list.
GYR: Use this channel for controlling the Gyro.
※ The settings for the “GYRO SENS” can be set under the function list.
NDL: Use this channel for “NEEDLE” adjustment with a Nitro engine.
※ The settings for the “NEEDLE” can be set under the function list.
System▋List▋
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Flight Mode Extension switch
Flight Mode Switch
Device Select
Selection of output Selection of output
Speed Switch
Selection of output Selection of output
Launch Switch
Launch Reverce Switch
Flight Mode Switch
Device Select
Selection of output Selection of output
Device Select