JR ProPo XG11, Operation Manual

Page: 43 / 124

41
⿟ Trim Input Function (TRIM IN)
By using the Trim Input, it is possible to change the mix values using the Trim Lever. Therefore, it is possible to
easily adjust the mix during flight.
⿟ If the servo direction is incorrect, it is possible to set the mixing amount in a negative direction to achieve an
appropriate setting.
⿟ The setting value in this function should be between 0 to ± 125. If the mixing amount is too much and you are
not able to achieve the desire servo throw, adjust the servo horn hole position (with a practical range of 40-70%)
outwards to have more throw.
▋
▋
Caution▋Note
⿟ Actually operate the servos and carefully confirm the settings before flying.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
Function▋List