JR ProPo XG11, Operation Manual

Page: 85 / 124

83
the servos held in their current positions to avoid possible risk from the motor changing speed (or turning on),
etc. The warning is set as "ON" as default. To cancel the function simply change it to "OFF".
⿟ Model Link Bind (MODEL LINK BIND )
By default, model link bind is turned on. With model link bind turned on, the bound receiver will only respond to
the model memory it was bound to. This is to avoid any risk of flying a model with the wrong model number
selected in the transmitter. This function is for safety, however it is possible to turn this function off for selected
model numbers. . With model link bind turned off, the receiver is bound generically to the transmitter. If you turn
model link bind off for two models, the receiver will respond to both these model memories without requiring re-
binding. Model link bind is turned "ON" by default - be sure to re-bind the model number if you decide to turn
this function off.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
With, for example, model link bind turned off for model memories 2 and 3, it is possible to have model 2 as a ‘calm
day’ setup, and model 3 as a ‘windy day setup’ for the same model, and swap between these without re-binding.
.
⿟ Stick Calibration (STICK CALIBRATION)
This function calibrates the neutral position of the stick and stick travel which is especially useful after changing
Stick modes ( Mode 1 to Mode 2 or Vice Versa). The calibration procedure is as follows.
① Set both right and left sticks to their center positions, and press the function key to calibrate neutral.
② Next move both right and left sticks up and down and right to left and press the Function key to calibrate stick
travels.
③ Be sure to check control movement and neutral positions on the servo monitor screen.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
⿟ Alert Warnings cannot be muted.
System▋List▋