JR ProPo XG11, Operation Manual

Page: 30 / 124

28
▋ Servo▋Speed【SERVO▋SPEED▋】
▋ ▋ Function▋Explanation
This function slows down the operation speed of the servos independently for each channel.
This function should be considered as a speed limiter. The speed setting can be set separately
for left/right (up/down). Additionally, the setting can be set to ON or OFF in each Flight Mode,
or controlled using optional switches. Further, this function can be turned ON or OFF using a
desired throttle stick position (not available for gliders).
▋ ▋ Setting▋Method
Rotate the dial to move the inverse display area and select the channel, then press the dial to
display the setting box, and carry out the speed setting.
“NORM” is the fastest setting, and the speed can be slowed between 0.1-15.0 seconds. This
indicates the time that the servo takes to rotate through 60 degrees. Note there may be some slight variation
depending on the servos used.
▋ ▋ For▋Helicopter
Adjustment of servo speed can be set to “ONE pattern" per channel, and can be coupled to the throttle stick to
turn “ON” or “Off”
▋ ▋ For▋Airplane
Adjustment of servo speed can be set to “TWO patterns” per channel, and can be coupled to the throttle stick at
two positions.
▋ ▋ For▋Glider
Adjustment of servo speed can be set to “TWO” per channel, although it cannot be coupled with the throttle stick.
But, by using SPS (Stick position Switch) it is possible to achieve a similar function.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
A switch can be selected to turn this function ON-OFF. ON-OFF operating
confirmation is displayed on the screen.
Speed in each direction
Select the channel
Select the channel
Select the channel
This will become ON at values below the set value.
ON-OFF using the Throttle Stick
(Only Helicopter and Airplane types)
Directions in which the Speed is to be controlled
Speed in each direction
Speed in each direction
Directions in which the Speed is to be controlled
Directions in which the Speed is to be controlled
A switch can be selected to turn this function ON-OFF. ON-OFF operating
confirmation is displayed on the screen.
Speed in each direction
Select the channel
Select the channel
Select the channel
This will become ON at values below the set value.
ON-OFF using the Throttle Stick
(Only Helicopter and Airplane types)
Directions in which the Speed is to be controlled
Speed in each direction
Speed in each direction
Directions in which the Speed is to be controlled
Directions in which the Speed is to be controlled
A switch can be selected to turn this function ON-OFF. ON-OFF operating
confirmation is displayed on the screen.
Speed in each direction
Select the channel
Select the channel
Select the channel
This will become ON at values below the set value.
ON-OFF using the Throttle Stick
(Only Helicopter and Airplane types)
Directions in which the Speed is to be controlled
Speed in each direction
Speed in each direction
Directions in which the Speed is to be controlled
Directions in which the Speed is to be controlled