JR ProPo XG11, Operation Manual

Page: 65 / 124

63
⿟ Curve Mixing
By default, this is set to “INH”. Select CURVE for using this Program Mixing. To “INH” this function, move the
cursor to the Master/Slave channel selection, then press the CLR key.
፧ Curve Point Setting
It is possible to set up to seven (7) mixing curve points at desired positions. Initially, there are three curve
points set - a Low point, Center point and High point. To add more points, select the Master channel and
press the ADD key. Or to delete a point, use the DEL key. To change the value at a point, move the cursor to
the location where you wish to make the change then press to inverse the display, and input the numeric
value.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
⿟ By activating the Exponential function, it is possible to smooth the transition between points on the curve.
Function▋List
Slave channel Current position Master channel
Switch Selection Throttle stick
coupling function
Mixing Offset on
reference point
Mixing value