JR ProPo XG11, Operation Manual

Page: 20 / 124

18
▋
Navigation▋during▋Model▋Setting
When a new model has been created, or when the model type has been changed, it is necessary to enter basic initial
information.
1) Type selection
2) Model Name
3) Complete some basic setup information depending on the model type selected, as shown below.
Functions▋Common▋to▋All▋Models
※When "NORMAL" wing type
is selected.
Type Selection
Model Name Input
1
2
※When CCPM is selected.
（GLID）
Glider
Dual Flap Selection
V Tail Selection
（ACRO）
Airplane
Wing Type Selection
※Dual Aileron Selection
V Tail Setting
（HELI）
Helicopter
Swash Type Selection
※Swash Mixing Setting
Gyro Channel Selection
●
HELI : Swash Type Selection -> Swash Mixing Setting * When CCPM is selected -> Gyro Channel Selection
●
ACRO : Wing Type Selection -> Dual Aileron Selection * When “NORMAL” wing type is selected
-> V Tail Selection
●
GLID : Dual Flap Selection -> V Tail Selection