JR ProPo XG11, Operation Manual

Page: 74 / 124

72
⿟ Model Erase
Model data stored on the “INTERNAL” memory or SD CARD can be erased. Be sure to double check the model
being erased before continuing.
※ If the currently selected model is erased, the new model creation wizard will automatically start. If wish to use
the current model number, be sure to copy it to another model number first and erase the particular model by
Model Select.
※ The ”TRANSFER” of data between transmitters can be only achieve when the Trainer cable (Sold Separately) has
been plugged in to the XG11 and the transmitter power switch is turned off.
※ When a model transferred from another transmitter is used, it will be necessary to carry out binding with the
receiver again.
▋
▋
Caution▋Note
⿟ While this screen is displayed, and during copy procedure, NEVER remove the SD Card under any circumstances.
There will be a danger of destroying Model Data which is on the card.
⿟ Only remove the insert or remove the SD card when the transmitter power is switched off.
⿟ Actually operate the servos and carefully confirm the settings before flying.
Model in use
/ /
Model copy can be selected by INTERNAL, SD-CARD or TRANSFER.
Model selection
display
Model selection
display
Copy Source Copy Source
Copy Destination Copy Destination
Usage model
System▋List▋