JR ProPo XG11, Operation Manual

Page: 41 / 124

39
▋ Governor【GOVERNOR】
▋ ▋ Function▋Explanation
A governor maintains the rotor rotation speed at a uniform value. This function sets the rotation
speed of the Governor to aid in stable flight. Different rpm settings can be made separately for each Flight Mode.
▋
▋
Setting▋Method
If the output “OUT” of an auxiliary channel is not set to “GOV” before using the function, the display in the
Function List will be shown as non-usable. In addition, a Trim Input switch function can also be used. On the
screen, set the rotor rotation speeds for each Flight Mode. Select the desired Flight Mode by rotating the dial,
then press the dial to display the box for numerical value adjustment. Note that because the setting from the
transmitter is a numeric adjustment, the actual rotation speed should be set and confirmed by the governor.
⿟ Trim Input Function (TRIM IN)
By using the Trim Input, it is be possible to change the governor sensitivity values using a Trim Lever. Therefore,
it is easy to adjust the rpm during flight.
▋
▋
Caution▋Note
⿟ Be sure to understand your Governor manual thoroughly to allow you to use this function correctly.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Corresponding flight mode
Output channel
RPM adjustment Trim input function