JR ProPo XG11, Operation Manual

Page: 38 / 124

36
▋ ▋ For▋Airplane
By default, the HOLD switch is allocated to the
“MIX SW” at POS1. It is possible to allocate this
function to any desired switch location.
⿟ For twin engines
It is possible to set the “HOLD” to one engine at
any desired position.
▋ ▋ Caution▋Note
⿟ Actually operate the servos and carefully confirm
the settings before flying.
Function▋List
In order to use the function,
INH should be changed to ACT.
Operation condition
Stick Auto function Stick Auto function
Hold Delay function Hold Delay function
In order to use the function,
INH should be changed to ACT.
Operation condition
Stick Auto function Stick Auto function
Hold Delay function Hold Delay function