JR ProPo XG11, Operation Manual

Page: 69 / 124

67
▋ TIMER【TIMER】
▋ ▋ Function▋Explanation
This transmitter incorporates Three Independent Timer systems as well as an Integrated Timer.
Each system has two types of timer – a count down timer and a stop watch timer. The timer can
be operated in Flight Modes and through free switch selection.
▋ ▋ Setting▋Method
⿟ DOWN TIMER
Initially, the timer function is inhibited - “INH”. Select (INH) and press the dial and select the “Down Timer”.
The default value for the DOWN timer is 10:00 - 10minutes and 00 seconds. The Down Timer can be set to a
maximum of 59 minutes 59 seconds. As the timer counts down, an alert signal will sound every 10 seconds
for times of 1 minute or less, and every second for times of 10 seconds or less. From zero, the timer will start
counting up and “+” will be displayed.
⿟ Stop Watch Timer (UP TIMER)
Initially, the “STOP” watch up timer function is inhibited - “INH”. To activate, select (INH) and press the dial to
select the “STOP” timer. The default settings for the STOP timer is 00:00 – 0 minutes and 0 seconds. The STOP
Timer can run to a maximum of 59 minutes 59 seconds and then returns to 0 minutes, 0 seconds. While the
timer is running, a signal will sound every minute.
⿟ Starting and Stopping the timer (START/STOP)
Function can be allocated to different switches to start or stop the timer. For example, the start switch could be
allocated to the SPS switch on the throttle then the Off switch to the trainer switch or vice versa. Alternatively,
the SPS switch could be used to turn the timer on and off. The timer switches are described below.
List of timer switches:
By Selecting “INH” switch on the “STOP” the timer can be used as to start the timer.
⿟ Timer counter (TODAY/TOTAL)
There is a counter function available for “TODAY” and “TOTAL”. It is possible to count the flights using this
counter either within a day (TODAY) or the total (TOTAL) number of times the timer has run for a particular
model. It is possible to initialize the counter to “Zero” by pressing the “CLR” key.
⿟ Integrated Timer (INTEGRATE TIMER) time reset
The Integrated Time is recorded individually for each model. When this time exceeds 100 hours, the time will
return to zero. This can be used as a reference for maintenance of each aircraft. This time can also be reset to
zero - set the cursor on the Integrated timer and press the dial to reset.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
⿟ It is possible to move from the Information and Timer screen to each timer function directly.
⿟ It is possible to reset the timer by pressing the CLR key after moving the cursor to the Timer display on the
Information and Timer screen.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Timer１
Select
INH/DOWN/STOP WATCH
Switch selection screen Switch selection screen
Integrated
Timer time reset
Start switch selection
Stop switch selection
Starting Counter
Timer２ Timer３
Function▋List