JR ProPo XG11, Operation Manual

Page: 75 / 124

73
▋ Model▋Type▋Select【TYPE▋SELECT】
▋ ▋ Function▋Explanation
This function allows selection of model type.
The type can be switched between Helicopter ⇔ Airplane ⇔ Glider.
Additionally, this screen will be automatically displayed when creating a new model.
▋ ▋ Setting▋Method
When entering this function screen from the System List, the model type of the currently selected
model can be changed. Select the type that you wish to change to by rotating the dial, then press
the dial to confirm. After doing so, you will be asked whether the current model data is to be
reset, so select “YES” to implement the reset.
For safety reasons, a screen initially appears confirming that you wish to stop radio wave
transmission. Select “YES” to continue to this function screen. Now no RF output will be transmitted.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
⿟ The connections with the receiver should be made as shown in the figure below.
▋ ▋ Receiver▋connection▋channel▋list
RECEIVER HELICOPTER AIRPLANE GLIDER
1)
THRO THRO THRO LAILE
2)
AILE AILE AILE RAILE
3) ELEV ELEV ELEV ELEV
4) RUDD RUDD RUDD RUDD
5)
GEAR GYRO GEAR GEAR
6)
AUX1 PIT. FLAP FLAP
7)
AUX2 GOV AUX2 AUX2
8) AUX3 NEDL AUX3 AUX3
9) AUX4 AUX4 AUX4 AUX4
10)
AUX5 AUX5 AUX5 AUX5
11)
AUX6 AUX6 AUX6 AUX6
▋ ▋ Caution▋Note
Because the previous data will be erased when the model type is changed, any important model data should be
copied and backed-up beforehand Also note that when the Model type is changed, the new model setup wizard
will automatically start, so chose the Model Type and Wing Types accordingly.
System▋List▋
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Usage model
Alert screen on Model changing Alert screen on Model changing