JR ProPo XG11, Operation Manual

Page: 24 / 124

22
Note:
Please refer to the explanations for "Names of Each Transmitter Control" to find out which function is allocated to
which switch.
⿟ INPUT (Flipping the switch)
By flipping the switch it is possible to change the dual rate and exponential settings.
As an example, on a 3 position switch, if the switch is away from the operator, this is "P0" (position 0), in the
center (middle) it is "P1" (Position 1), and toward the operator is "P2" (Position 2).
⿟ FM-AUTO: (flight mode change)
By flipping the flight mode switch, it is possible to automatically change the dual rate and exponential settings
for each flight mode.
※ Note that "FM-AUTO" switch selection has a higher priority than "INPUT"
⿟ SW-AUTO (Changing the Switch Selection)
By using 6 options for SW SEL, it is possible to change the Dual rate Amount, combine with available switches.
A SPS (Stick Position Switch) can also be selected to change the dual rate amount
※ The following sequence gives the flight mode priority when the 6 kinds of SW-SEL (Switch Select) are activated.
SWSEL1 > SWSEL2 > SWSEL3 > SWSEL4 > SWSEL5 > SWSEL6
Function▋List
FM-AUTO (Flight mode change)
SW-AUTO (Changing the Switch Select)
INPUT (Flipping the switch)
The position before changing. The position before changing.
The position after changing. The position after changing.
Delay time
Dual Rate amount
Exponential amount