JR ProPo XG11, Operation Manual

Page: 27 / 124

25
▋ Limit▋Adjust【LIMIT▋ADJUST】
▋ ▋ Function▋Explanation
When multiple channel mixing is used, the resultant servo movement angle may become to large,
and an unreasonable force be applied to the linkages. If limit values are set, it is possible to limit
the maximum movement of the servos, regardless of programmable mixing, etc.
▋
▋
Setting▋Method
Set the limit values separately for left/right and up/down directions for each channel (servo).
Select the channel using the dial, and press the dial to display the adjustment box.
※ The channel names on the screen will differ according to the model type.
⿟ By moving the appropriate control stick, the numerical values can be independently changed for left and right
(up and down), so that the control surface travel can be individually adjusted. When the cursor is at the inverse
display, the setting values can be modified, and also reset using the CLR key.
▋ ▋ Caution▋Note
⿟ Operate the servos and carefully confirm the control surfaces move as expected before flying.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Select the channel.
This screen is for Helicopter type.
Limit for each right and left.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー