JR ProPo XG11, Operation Manual

Page: 21 / 124

19
▋ FLIGHT▋MODE
▋ ▋ Function▋Explanation
⿟ The Flight Mode function allows switching between various aircraft settings using a switch.
This means it is possible to select aircraft flight characteristics using a ‘one-touch’ operation.
⿟ The maximum number of flight modes which can be selected various with model type. It is
possible to select up to six flight modes for helicopters, up to three flight modes for airplanes,
and a maximum of five flight modes for gliders.
⿟ The current Flight Mode is displayed on the Initial INFO screen, where it can be confirmed. In
addition, it is possible to change the displayed flight mode name using the Flight Mode Name
screen in the System List.
※ Important note: By default, the Flight Mode switches in airplane and glider models are not set. Activate Flight
Modes using the Device Select screen.
▋ ▋ Helicopter▋flight▋mode
⿟ NORMAL
⿟ STUNT-1
⿟ STUNT-2
⿟ STUNT-3
⿟ STUNT-4
⿟ HOLD
※ STUNT-3 and STUNT-4 are not active by default.
It is possible to activate STUNT-3 and STUNT-4
from the "DEVICE SELECT" menu in the System
List.
※ Also note that "HOLD" is not active by default – it can be activated in the Function List (see "Throttle hold").
※ The following sequence gives the flight mode priority when the various switches are activated.
"HOLD > NORMAL > STUNT-3/STUNT-4 > STUNT-1/STUNT-2"
▋ ▋ Airplane▋flight▋mode
⿟ FMOD-0
⿟ FMOD-1
⿟ FMOD-2
※ Airplane flight modes are not activated by default.
It is possible to activate these flight modes in the
system list, "DEVICE SELECT".
Functions▋Common▋to▋All▋Models
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Current Flight mode
Current Flight mode
Current Flight mode