JR ProPo XG11, Operation Manual

Page: 83 / 124

81
▋ Warning【WARNING】
▋ ▋ Function▋Explanation
If the Throttle Stick or Flight Mode switches are set to potentially dangerous positions when the
transmitter is switched on, an alert is triggered. A warning will be displayed on the LCD screen,
and radio waves will not be emitted until the throttle stick and flight mode switches have been
returned to safe positions.
▋ ▋ Setting▋Method
First change “INH” to “ACT”, to activate this function. Then set the position where the warning
will be given using the Throttle Stick, and choose the switchs and positions where the warning is
to be set. Particularly for electrically powered gliders, do not forget to set the switch that
operates the motor.
▋ ▋ For▋Helicopter
Initially, the Warning alert will not shut off unless the following conditions are met:
⿟ Throttle stick set to the slowest position.
⿟ Flight Mode Switch set to Normal Mode “NORM”.
▋ ▋ For▋Airplane
Initially, the Warning alert will not shut off unless the following conditions are met:
⿟ Throttle stick set to the slowest position.
▋ ▋ For▋Glider
There is no Warning alert default for Glider Mode. If necessary, set a “Warning” which suits your application. For
example, with an electric powere glider, you may set a warning to ensure the motor switch is in the Off position
when the transmitter is turned on.
▋
▋
Caution▋Note
⿟ For safety reasons, be certain to activate this function and check the warning works as expected.
System▋List▋
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING