Johnson Controls Tyco PowerSeries Pro HS3032 Reference Manual Download Page 100

Page: 100 / 327

Section 6: Programming

Wireless keypad low battery

Wireless siren low battery

Wireless key low battery

The output can be configured to follow the state of the low battery trouble(s) or it can activate for a period of time and automatically

restore.

165 – Proximity Tag Used

This output activates when the selected proximity tag is presented.

Assign this output to a user by entering a user number from 0002 to 1000. To enable this attribute for all proximity tags, enter 000 in

PGM Configuration [011].

See "[007] - [008] PGM Configuration" on page 95

166 – Partition Prox Used

This output activates when a proximity tag is presented at a system keypad equipped with a proximity tag reader, including global

keypads. The proximity tag must be assigned to a valid user and the PGM must be assigned to a partition that the user has

permission to access.

Assign this output to a partition in section [007], PGM Partition Assignment. Use section [011], PGM Configuration Options, to assign a

schedule. When [011] is programmed as 000, the output activates any time a valid proximity tag is presented. When [011] is

programmed as 1-4, the output activates only when the proximity tag is presented during the scheduled interval.

175 – Bell Status and Programming Access Output

This PGM activates when the siren, Installer Programming mode or DLS/SA is active. It deactivates after bell timeout, when Installer

Programming is exited or when DLS/SA programming is disconnected.

176 – Remote Operation

This output is activated and deactivated remotely on command from DLS software.

Note:

Not for use with UL/ULC listed installations.

184 – Open After Alarm

This output activates when the system has been disarmed after an alarm. It deactivates when a valid user code is entered or when

the PGM Output timer expires.

201-231 – Zone Follower (Zones 1-248)

This output type is assigned to a group of zones and is normally activated, but deactivates when a zone is tripped. Zones are

assigned to this output in the following groups:

Zone group

Zones

Zone group

Zones

001

1-8

017

129-136

002

9-16

018

137-144

003

17-24

019

145-152

004

25-32

020

153-160

005

33-40

021

161-168

006

41-48

022

169-176

007

49-56

023

177-184

008

57-64

024

185-192

009

65-72

025

193-200

010

73-80

026

201-208

011

81-88

027

209-216

012

89-96

028

217-224

013

97-104

029

225-232

014

105-112

030

233-240

015

113-120

031

241-248

016

121-128

- 100 -

Summary of Contents for Tyco PowerSeries Pro HS3032








































































































































































































































































































































Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands

Johnson Controls Tyco PowerSeries Pro HS3032, Reference Manual

Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands