Johnson Controls Tyco PowerSeries Pro HS3032 Reference Manual Download Page 142

Page: 142 / 327

Section 6: Programming

Note:

If no value is programmed and DHCP is used, the DHCP server will assign this value. If an address is programmed and DHCP

is used, the programmed address will be used instead of the DHCP address.

Programming Options

[010] System Toggle Options 3

[1] 2-Way Audio Over Cellular.

Default (OFF)

ON:

2-Way Audio Over Cellular is enabled.

OFF:

2-Way Audio Over Cellular is disabled.

[2] Visual verification.

Default (OFF)

ON:

Visual verification is enabled.

OFF:

Visual verification is disabled.

[3] Video On Demand.

Default (OFF)

ON:

Video On Demand is enabled.

OFF:

Video On Demand is disabled.

[4] Receiver Group.

Default (OFF)

ON:

Receiver Group is enabled.

OFF:

Receiver Group is disabled.

[5] Reserved.

[6] Reserved.

[7] Reserved.

[8] Reserved.

[011] Communicator Installer Code

Default (CAFE)

A communicator installer code is required to program the communicator module. Valid range: 0000-FFFF.

[012] DLS Incoming Port

Default (03062)

The DLS incoming local port (listening port) is the port DLS IV uses when connecting to the communicator. If a router or gateway is

used, it must be programmed with a transmission control protocol (TCP) port forward for this port to the communicator module IP

address. Valid range: 00000 - 65535.

[013] DLS Outgoing Port

Default (03066)

The DLS outgoing port is used for outgoing sessions to DLS IV after an SMS request has been sent to the communicator. Use this

section to set the value of the local outgoing port. The value must be changed if the communicator is located behind a firewall and

must be assigned a particular port number, as determined by the network administrator. In most cases, changing the default value or

configuring the firewall with this port is not required.

Valid range: 00000-65535.

Note:

If section [006] toggle option [7] is ON, DLS will use the primary path for session. If section [006] toggle option [7] is OFF, DLS

will use the Ethernet path, if available.

[015] DLS Call-Up IP

Default (000.000.000.000)

[016] DLS Call-Up Port

Default (00000)

Valid range: 00000-65535.

[018] Receiver Group Pair

Use

Receiver Group Pair

to send visual verification signals to multiple central station receivers, or when the product is installed in

ULC applications. The communicator retransmits signals to the individual receivers if there is a communications problem, and

indicates an FTC on the control panel if there is an error in either of the communication paths. The system keypad displays

Receiver

X FTC Trouble

You can assign any two receiver paths to the receiver group, but using Ethernet Receiver 1 and Cellular Receiver 1 in this

configuration ensures a single point of failure does not disable both alarm reporting paths.

- 142 -

Summary of Contents for Tyco PowerSeries Pro HS3032








































































































































































































































































































































Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands

Johnson Controls Tyco PowerSeries Pro HS3032, Reference Manual

Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands