Johnson Controls Tyco PowerSeries Pro HS3032 Reference Manual Download Page 55

Page: 55 / 327

Section 4: Configuration

Number of flashes

Trouble type

No keypads enrolled

Module supervision trouble

Bus low voltage

Low battery trouble

AC trouble

AUX

Bell trouble

TLM trouble

Entering letters manually (system labels)

1. In Installer Programming, enter the section requiring text input.

2. Use the arrow keys [<][>] to move the cursor to a blank space or existing character.

3. Press the number key corresponding to the appropriate letter. Each number button accesses three letters and a number. The first

press of the number key displays the first letter. The second press displays the second letter, and so on.

4. To select lower case letters press [*]. The Select Options list opens. Scroll to “lower case” and press [*] again to select.

5. When the required letter or number is displayed use the arrow keys [<][>] to scroll to the next letter.

6. When finished, press the [#] key to save the label and exit.

7. Continue from step 2 until all labels are programmed.

For information on entering hexadecimal data, see

"Programming hex and decimal data" on page 83

How to enter data

Conventions used in this manual

Brackets [ ] indicate numbers or symbols that must be entered on the keypad.

For example, [*][8][Installer Code][804] requires the following key entries:

[*][8] [5555] [804]

[*][8]

Initiates a special command

[5555]

Enter the installer code (default installer code is 5555)

[804]

Programming section being accessed

4.3 Enrollment

All optional modules and devices must be enrolled on the system. During enrollment, the device ID is identified to the control panel

and zones are assigned. A wireless transceiver HSM2HOST or an RF keypad must be enrolled before wireless devices are enrolled.

Enrolling modules

During automatic and manual enrollment, if an attempt is made to enroll more than the maximum number of modules, an error tone

sounds and a message is displayed on LCD keypads.

Modules can be enrolled automatically or manually using section [902] of Installer programming. For instructions on enrolling

modules, see

"Module Programming"

on page 156

To confirm that a module has been successfully enrolled, use Installer programming section [903].

See "[903] Confirm Module" on

page 157

Enrolling the first keypad

To enroll a hardwired keypad, connect the keypad to the alarm controller, power up the alarm panel then press any button on the

keypad.

To enroll a wireless keypad, first connect the HSM2HOSTx wireless integration module to the alarm controller. Next, power up the

alarm panel and a wireless keypad. Press any button on the keypad to enroll it on the HSM2HOSTx. The HSM2HOSTx is then

enrolled on the alarm panel. To enroll other keypads, see

"Module Programming"

on page 156.

- 55 -

Summary of Contents for Tyco PowerSeries Pro HS3032








































































































































































































































































































































Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands

Johnson Controls Tyco PowerSeries Pro HS3032, Reference Manual

Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands