Johnson Controls Tyco PowerSeries Pro HS3032 Reference Manual Download Page 95

Page: 95 / 327

Section 6: Programming

Week

Valid entries are 000-005.

Enter “000” to program a specific date (1-31) in the Day field. Enter 001-005 to program the specific week of the month. 005 is the last

week of the month.

Day

1-31 (if 000 is programmed in the Week field). 0-6 (Sunday-Saturday) if 001-005 is programmed in the Week field.

Hour

Valid entries are 00-23 hours. This is the time of day to advance or turn the clock back.

Increment

Valid entries are 1 or 2 hours. This is the number of hours to advance or turn the clock back.

Access Codes

This section is used by installers to program the installer code, the master code and the maintenance code. For information on

programming other access codes, see

"[*][5] Program access codes"

on page 73.

[006] Installer Defined Access Codes

This is the base menu used by installers to program the installer code [001], the master code [002] and the maintenance code [003].

See below for details.

[001] – Installer Code

This code is used by the installer to gain access to Installer Programming [*][8]. Users with this access code have access to all levels

of system programming.

Note:

For EN50131-1 approved installations the installer code cannot change the master code or any other level 2 codes.

[002] – Master Code

This code is used by the master user, a person designated to perform operational tasks beyond those of the standard user. The

master code provides access to functionality in the [*][5] and [*][6] menus.

[003] – Maintenance Code

This code is usually assigned temporarily to maintenance personnel who must deactivate the alarm to enter the premises. The

maintenance code can arm and disarm the system, but does not grant access to any other functionality.

[005] – Code Version

A programmable 3-digit pin is required to calculate the 5-digit remote reset code. The range of the pin is 000-255 in

decimal. The default value of the pin code is 000.

[007] - [008] PGM Configuration

This section describes how to set up and configure programmable outputs.

PGMs are used to send electrical current to external devices such as lights and sirens, usually when an alarm event occurs. The

alarm controller provides up to two 100mA PGMs and two 300mA PGM. PGM outputs can be expanded using the optional 8-output

expander (HSM2208), the 4 high-current output expander (HSM2204) and the Corbus Repeater (HSM304CX) with 4 relay PGM

outputs.

Programming an output is a four-step process:

1. Program the PGM

2. Assign the PGM to a partition.

3. Assign an output attribute.

4. Assign an output option.

See "[011] PGM Configuration Options" on page 109

for PGM slot assignment.

[007] PGM Programming

This is the base menu used by the installer to assign PGMs to the main bell and a partition.

[000] Main Bell Partition Assignment

This programming section is used to define which partitions activate the main bell when they go into alarm. All partitions are selected

by default.

- 95 -

Summary of Contents for Tyco PowerSeries Pro HS3032








































































































































































































































































































































Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands

Johnson Controls Tyco PowerSeries Pro HS3032, Reference Manual

Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands