Johnson Controls Tyco PowerSeries Pro HS3032 Reference Manual Download Page 73

Page: 73 / 327

Section 5: System operation

Alarm tone

Zone Name -Voice annunciation (HS2LCDWFVPROx keypads only)

The above door chime sounds are programmable in section [861]-[892], subsections [101]-[228].

[*][5] Program access codes

Use this section to perform the following functions:

press [1] to program user codes 0002-1000, and master code 0001

press [2] to enroll a proximity tag

press [3] to add a custom label for each user

press [4] to assign users to partitions

press [5] to program user attributes

Assign access codes

In order to access alarm system functionality, users must be added to the system. This involves creating a unique access code and

assigning attributes to each user. Access codes are programmed via the [*][5] menu.

Access code types

The alarm system provides the following access code types:

Code

Add user

Delete user

Arm

Disarm

[*][5]

[*][6] [*][8]

Installer

Yes +

Master

All*

All

Yes

Maintenance

Yes

User

Yes

No**

Supervisor

All but master

Yes

Duress

Yes

One-time use

Yes

1/day

+ If section [020] option 7 is on, a user must enter [*][6][Master Code][05] to give the installer permission to access programming.

* Can only change master code if section [015] option 6 is off.

** Yes if [023] option 8 is on.

The Installer and Master codes are system codes. They can be changed but not deleted. The other codes are user-defined and can

be added or deleted as necessary. By default, access codes have the same partition and attribute programming as the code used to

program them.

Access codes are either 4, 6 or 8 digits in length, depending on the setting of programming section [041]. Duplicate codes are not

valid.

Note:

EN50131-1 compliant systems using more than 100 access codes shall set the access code to 8 digits (section [041], option

02).

Installer Code

This code provides access to Installer Programming [*][8]. The installer code is only used to gain access to configure the system

though [*][8] Installer Programming and does not have access to any other function. This code can be programed by the installer in

section [006][001]. The default is 5555 (4-digit), 555555 (6-digit) or 55555555 (8-digit).

Note:

For EN50131-1 approved installations the installer code cannot change the master code or any other level 3 codes. Attempting

to access the master code from the installers code generates an error tone from the system.

Master Code - Access Code [0001]

By default the master code can access all partitions and can perform any keypad function. This code can be used to program all

access codes, including the supervisor and duress codes.

If section [015] option 6 is on, the master code can only be changed by the installer via Installer Programming.

The default is 1234 (4-digit), 123456 (6-digit) or 12345678 (8-digit).

The master code can be returned to factory default settings using Installer Programming section [989].

Maintenance Code

The maintenance code can only be used to arm and disarm the system. It cannot bypass zones. Use [*][9] to arm the system, cancel

auto-arming, or perform [*][7] command functions. No arm/disarm bell squawks are sounded when the maintenance code is used.

- 73 -

Summary of Contents for Tyco PowerSeries Pro HS3032








































































































































































































































































































































Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands

Johnson Controls Tyco PowerSeries Pro HS3032, Reference Manual

Search results

Summary of Contents for Tyco PowerSeries Pro HS3032

Reviews:

Related manuals for Tyco PowerSeries Pro HS3032

Brands by name

Popular brands