![background image](http://html1.mh-extra.com/html/jcm-global/uba-pro-rt-series/uba-pro-rt-series_operation-and-maintenance-manual_3541085102.webp)
© 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 0
Section 6
UBA Pro RT/RQ™ Series Banknote Recycler
Calibration and Testing
Note Position Sensor 1-3 Test
To perform the Note Position Sensor 1 through 3
Test on the RT Transport side, proceed as follows:
1. Ensure that the Recycler and Cash Box is prop-
erly installed.
2. Launch the Performance Test Program (see
3. Select “
TWIN_POSITION_SENSOR_TEST1
”
a
).
4. Click the “
Start
”
Screen Button (Figure 6-
b
) to begin the Test.
5. Follow the procedures below.
6. Confirm the “
ON/OFF
” indication (Detected/
NOT Detected) appeared in the “
RC-Position
sensor 1 (RC-Twin)
” area (Figure 6-44
a
).
7. Click the “
Stop
”
Screen Button (Figure 6-
b
) to end the test.
Note Position Sensor A-C Test
To perform the Note Position Sensor A through C
Test on the RT Transport side, proceed as follows:
1. Ensure that the Recycler and Cash Box is prop-
erly installed.
2. Launch the Performance Test Program (see
page 6-7).
3. Select “
TWIN_POSITION_SENSOR_TEST2
”
a
).
4. Click the “
Start
”
Screen Button (Figure 6-
b
) to begin the Test.
5. Follow the procedures below.
6. Confirm the “
ON/OFF
” indication (Detected/
NOT Detected) appeared in the “
RC-Position
sensor 2 (RC-Twin)
” area (Figure 6-46
a
).
7. Click the “
Stop
”
Screen Button (Figure 6-
b
) to end the test.
Test Item
Procedure
Note Position Sensor 1
Remove the Recycler
↓
Open/close the Front Transport to
cover/uncover each Sensor
Note Position Sensor 2
Note Position Sensor 3
Remove the Transport Unit
↓
Cover/uncover the Sensor
Figure 6-43
Note Position Sensor 1 -3 Test 1
Figure 6-43
Note Position Sensor 1 -3 Test 1
a
b
NOTE: Refer to “Sensor, Roller and
Belt Locations” on page 2-16 for the
detailed Sensor locations.
Front
Transport
Position
Sensor 3
Transport
Unit
Figure 6-44
Note Position Sensor 1 -3 Test 2
Figure 6-44
Note Position Sensor 1 -3 Test 2
a
b
Scroll
Test Item
Procedure
Note Position Sensor A
Remove/reseat the Recycler to
cover/uncover the Sensors.
Note Position Sensor B
Note Position Sensor C
Note Position Sensor A -C Test 1
Figure 6-45
Note Position Sensor A -C Test 1
a
b
NOTE: Refer to “Sensor, Roller and
Belt Locations” on page 2-16 for the
detailed Sensor locations.
Note Position Sensor A -C Test 2
Figure 6-46
Note Position Sensor A -C Test 2
a
b
Scroll