![background image](http://html1.mh-extra.com/html/jcm-global/uba-pro-rt-series/uba-pro-rt-series_operation-and-maintenance-manual_3541085036.webp)
© 2020, JAPAN CASH MACHINE CO., LTD.
2 - 2
Section 2
UBA Pro RT/RQ™ Series Banknote Recycler
Installation
Bottom Installation (For Standard Instal-
lation Type Only)
When a bottom mounting configuration is preferred,
perform the following procedure:
1.
From Inside:
Secure the inside of the RT/RQ Bottom Frame
into its intended location using four (4) M4
Screws
a
1
through
a
4
).
From Outside:
Secure the outside of the RT/RQ Bottom Frame
into its intended location using the four (4)
threaded φ4 Studs (Figure 2-3
b
1
through
b
4
).
Bezel Installation
1. Open the UBA Pro’s Cover (Figure 2-4 a).
2. Slide the Bezel (Figure 2-4 b) on to the UBA Pro
Bezel Tabs (Figure 2-4 c
1
& c
2
).
3. Secure the Bezel (Figure 2-4 ba) using two (2)
specified Screws (Figure 2-4 db
1
& db
2
).
External Harness Installation
1. Plug the Power Cable (Figure 2-5
a
) and the
b
) into each Con-
nector.
2. Secure the Connector (Figure 2-5
c
) using two
(2) specified Screws (Figure 2-5
d
1
&
d
2
).
Side Installation (Standard and SU
Figure 2-2
Side Installation (Standard and SU
Installation Types)
a
1
a
2
a
3
a
4
a
5
a
6
a
7
a
8
a
1
a
2
a
3
a
4
a
5
a
6
a
7
a
8
SH2 Box Frame
Large Box Frame
Caution: This installation is allowed
only when the RT/RQ unit is used as
Standard installation.
NOTE: Prepare the following Screw:
•
φ4 Stud (the maximum length of each Stud
should not extend more than 10mm long
from the inside of the Bottom Frame
•
Tightening Torque: 120N·cm
Figure 2-3
Figure 2-3
Bottom Installation (Standard
Installation Type)
1
a
2
a
3
a
4
b
1
b
2
b
3
b
4
NOTE: Prepare the following Screw:
•
M3x16 Screw (provided)
•
Tightening Torque: 60N·cm
Figure 2-4
Figure 2-4
Bezel Installation
b
d
2
d
1
c
1
c
2
NOTE: Prepare the following Screw:
•
M3x10 Screw (provided)
•
Tightening Torque: 80N·cm
Figure 2-5
Figure 2-5
External Harness Installation
d
1
d
2
a
b
c