JCM GLOBAL UBA Pro RT Series, Operation And Maintenance Manual

Page: 105 / 196

P/N 960-000213R_Rev.A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 3
Calibration and Testing UBA Pro RT/RQ™ Series Banknote Recycler Section 6
Feed Motor Speed Reverse Rotation Test (RQ
Transport)
To perform the Feed Motor Speed Test in the
reserve rotation on the RQ Transport side, proceed
as follows:
1. Ensure that the Recycler and Cash Box is prop-
erly installed.
2. Launch the Performance Test Program (see
page 6-7).
3. Select “
QUAD_FEED_MOTOR_REV_TEST
”
(Figure 6-55 a ).
4. Click the “
Start
” Screen Button (Figure 6-
55 b ) to begin the Test.
5. The measured speed will appear in the “
RC-Feed
Motor (RC-Quad)
” area (Figure 6-56 a ) on the
Screen.
6. Confirm that the motor speed is in the acceptable
range: 600mm/sec to 900mm/sec
7. Click the “
Stop
” Screen Button (Figure 6-
56 b ) to end the test.
Flapper Motor Operation Time Test (RQ
Transport)
To perform the Flapper Motor Operation Time Test
on the RQ Transport side, proceed as follows:
1. Launch the Performance Test Program (see
page 6-7).
2. Select “
QUAD_FLAPPER_MOTOR_TEST
” (Fig-
ure 6-57 a ).
3. Click the “
Start
” Screen Button (Figure 6-
57 b ) to begin the Test.
4. The measured time will appear in the “
RC-Flap-
per (RC-Quad)
” area (Figure 6-58 a ) on the
Screen.
5. Confirm that the operation time is in the accept-
able range: 300msec to 950msec.
6. Click the “
Stop
” Screen Button (Figure 6-
58 b ) to end the test.
Figure 6-55 Feed Motor Speed Reverse
Rotation Test (RQ Transport) 1
Figure 6-55 Feed Motor Speed Reverse Rotation
Test (RQ Transport) 1
a
Scroll
b
Figure 6-56 Feed Motor Speed Reverse
Figure 6-56 Feed Motor Speed Reverse Rotation
Test (RQ Transport) 2
a
b
Figure 6-57 Flapper Motor Operation Time Test
Figure 6-57 Flapper Motor Operation Time Test
(RQ Transport) 1
a
Scroll
b
Figure 6-58 Flapper Motor Operation Time Test
Figure 6-58 Flapper Motor Operation Time Test
(RQ Transport) 2
b
Scroll
a