![background image](http://html1.mh-extra.com/html/jcm-global/uba-pro-rt-series/uba-pro-rt-series_operation-and-maintenance-manual_3541085112.webp)
© 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2 0
Section 6
UBA Pro RT/RQ™ Series Banknote Recycler
Calibration and Testing
RT Transport Performance Tests
This section provides instructions for conducting a
Performance Test Without a PC on the RT
Transport side (Figure 6-71
a
).
Feed Motor Normal Rotation Test
(RT Transport)
To run the Feed Motor Normal Rotation Test on the
RT Transport side, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches of the UBA Pro Unit as
below (Figure 6-90).
3. Set the DIP Switches of the RT/RQ Unit as below
(Figure 6-91).
4. Apply electrical power.
5. Confirm that the Status LED/Collect Button is lit
at
Green
Color and then turns off.
6. Remove the Recycler from the RT Transport.
7. To start the Test, set the UBA Pro DIP Switch #8
to
OFF
8. The Belts of the Transport Unit will start running
in the normal rotation direction when the Feed
Motor functions properly.
9. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Figure 6-90
Feed Motor Normal Rotation Test
(RT Transport) 1
DIP Switches #1, #2, #6, #8 ON
ON
1
2
3
4
5
6
7
8
Figure 6-91
Feed Motor Normal Rotation Test
(RT Transport) 2
DIP Switch #1 ON
ON
1
2
3
4
5
6
7
8
NOTE: Wait for the Status LED to turn off
in order to run the test properly.
Figure 6-92
Feed Motor Normal Rotation Test
(RT Transport) 3
Green
ON
OFF
Figure 6-93
Figure 6-93
Feed Motor Normal Rotation Test
(RT Transport) 4
Figure 6-94
Figure 6-94
Feed Motor Normal Rotation Test
(RT Transport) 5
DIP Switch #8 OFF
ON
1
2
3
4
5
6
7
8
Figure 6-95
Figure 6-95
Feed Motor Normal Rotation
Test (RT Transport) 6