![background image](http://html1.mh-extra.com/html/jcm-global/uba-pro-rt-series/uba-pro-rt-series_operation-and-maintenance-manual_3541085093.webp)
S e c t i o n 6
© 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1
This section provides Calibration and Performance
Testing instructions for the UBA Pro RT/RQ™
Series Banknote Recycler (RT/RQ).
This section contains the following information:
JCM Tool Suite Standard Edition Modes
Tool Requirements
Figure 6-1 illustrates and identifies the tools and
equipment interconnects necessary to install and/or
download the Application Software, USB driver
and Software, to calibrate Sensors, and to perform
the Performance Test using a PC.
Installation Procedures
Perform the following steps to install the “
JCM Tool
Suite Standard Edition
” Application Software and
USB Drivers (Refer to Figure 6-1 for the necessary
Tool and Harness Connections ).
Part 1 - JCM Tool Suite Installation
1. Copy the “
JCMToolSuiteStandardEdition.zip
”
Application Software and extract on to the Desk-
top.
2. Double-click on “
Setup.exe
a
).
3. The “
JCM Tool Suite Standard Edition - Install
Shield Wizard
” Screen shown in Figure 6-3 will
appear.
4. Click the “
Next>
”
Button (Figure 6-3
a
).
6 CALIBRATION AND TESTING
Figure 6-1
Figure 6-1
Tool and Harness Connections
a) RT/RQ Unit
b) Power Supply
c) PC (OS: Windows
®
7/8/10)
(USB Driver Installed)
d) USB Cable
d
1
) USB Type-A (PC Side)
d
2
) USB Type-C (UBA Pro Side)
e) Application Software*
(JCM Tool Suite Standard Edition)
f) Reference Paper (KS-101, Centering Type)
*. Containing USB Downloader, Sensor Calibration,
Performance Test programs and Utility Function.
a
b
d
d
1
d
2
&
f
NOTE: Do Not put too much
pressure on the USB
Connector to avoid the risk
of damage to the UBA Pro’s
PCB.
NOTE: Uninstall the current version of the
JCM Tool Suite application software
installed on your PC before updating to a
newer version.
Figure 6-2
Figure 6-2
JCM Tool Suite Installation 1
a
Figure 6-3
JCM Tool Suite Installation 2
a