JCM GLOBAL UBA Pro RT Series, Operation And Maintenance Manual

Page: 119 / 196

P/N 960-000213R_Rev.A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2 7
Calibration and Testing UBA Pro RT/RQ™ Series Banknote Recycler Section 6
Flapper Motor Test (RQ Transport)
To run the Flapper Motor Test on the RQ Transport
side, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches of the UBA Pro Unit as
below (Figure 6-141).
3. Set the DIP Switches of the RQ Unit as below
(Figure 6-142).
4. Apply electrical power.
5. Confirm that the Status LED/Collect Button is lit
at Green Color and then turns off.
6. Remove the Recycler from the RQ Transport.
7. Pull down the Front Transport Unit.
8. To start the Test, set the UBA Pro DIP Switch #8
to
OFF
(Figure 6-145).
9. The Rotary Guide (Figure 6-146 a ) will change
the transport path in 3 directions when it func-
tions properly:
•
A : UBA Pro to Recycler
•
B : UBA Pro to Cash Box
•
C : Recycler to Cash Box.
10. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Note Position Sensor 4 - 6 Test

(RQ Transport)
To run the Note Position Sensor 4 - 6 Test on the
RQ Transport side, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches of the UBA Pro Unit as
below (Figure 6-147).
3. Set the DIP Switches of the RQ Unit as below
(Figure 6-148).
Figure 6-141 Flapper
Figure 6-141 Flapper Motor Test (RQ Transport) 1
DIP Switches #1, #2, #6, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-142 Flapper
Figure 6-142 Flapper Motor Test (RQ Transport) 2
DIP Switches #3, #8 ON
ON
1 2 3 4 5 6 7 8
NOTE: Wait for the Status LED to turn off
in order to run the test properly.
Figure 6-143 Flapper Motor
Figure 6-143 Flapper Motor Test (RQ Transport) 3
Green ON
OFF
Figure 6-144 Flapper Motor
Figure 6-144 Flapper Motor Test (RQ Transport) 4
Figure 6-145 Flapper
Figure 6-145 Flapper Motor Test (RQ Transport) 5
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-146 Flapper Motor
Figure 6-146 Flapper Motor Test (RQ Transport) 6
A
B
C
a
a
a
Figure 6-147 Note
Figure 6-147 Note Position Sensor 4 - 6 Test
(RQ Transport) 1
DIP Switches #1, #2, #6, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-148 Note
Figure 6-148 Note Position Sensor 4 - 6 Test
(RQ Transport) 2
DIP Switches #4, #8 ON
ON
1 2 3 4 5 6 7 8