![background image](http://html1.mh-extra.com/html/jcm-global/uba-pro-rt-series/uba-pro-rt-series_operation-and-maintenance-manual_3541085040.webp)
Section 2
UBA Pro RT/RQ™ Series Banknote Recycler
Installation
© 2020, JAPAN CASH MACHINE CO., LTD.
2 - 6
Connector Pin Assignments
USB Interface Connector Pin Assignments (UBA Pro Side)
Photo Coupler Interface Connector Pin Assignments (UBA Pro Side)
Table 2-5
USB Interface Connector Pin Assignments (UBA Pro Side)
Socket (UBA Pro Unit Side): DRA-20PC-FO (JAE)
Contact (UBA Pro Unit Side): D02-22-26P-10000 (JAE)
Socket (Frame Side): DRA-20SC-FO (JAE)
Contact (Frame Side): D02-22-26S-10000 (JAE)
Contact (Frame Side) Pin No.3, No.13: D02-22-22S-10000 (JAE)
Recommended Wires: Slit Wire UL1061 AWG #26
Pin No.
Signal Name
I/O
*
*. I/O (input/output) is the terminal as viewed from the RT/RQ Unit’s side.
Function
1
-
-
Reserved (For the UBA Pro Side)
2
-
-
Reserved (For the UBA Pro Side)
3
M.RES
IN
Acceptor Reset Signal Line
4
NC
-
No Connection
5
-
-
Reserved (For the UBA Pro Side)
6
NC
-
No Connection
7
NC
-
No Connection
8
Vbus
IN
USB Communication Vbus Signal Line (+5V DC)
9
-DATA
IN/OUT USB Communication Input/Output Signal Line
10
+DATA
IN/OUT USB Communication Input/Output Signal Line
11
-
-
Reserved (For the UBA Pro Side)
12
GND (USB)
-
USB Communication Ground (0V DC)
13
NC
-
No Connection
14
LED POWER
-
LED Drive Line (Anode)
15
-
-
Reserved (For the UBA Pro Side)
16
NC
-
No Connection
17
-
-
Reserved (For the UBA Pro Side)
18
LED -
-
LED Drive Line (Cathode)
19
NC
-
No Connection
20
-
-
Reserved (For the UBA Pro Side)
Table 2-6
Photo Coupler Interface Connector Pin Assignments (UBA Pro Side)
Socket (UBA Pro Unit Side): DRA-20PC-FO (JAE)
Contact (UBA Pro Unit Side): D02-22-26P-10000 (JAE)
Socket (Frame Side): DRA-20SC-FO (JAE)
Contact (Frame Side): D02-22-26S-10000 (JAE)
Contact (Frame Side) Pin No.3, No.13: D02-22-22S-10000 (JAE)
Recommended Wires: Slit Wire UL1061 AWG #26
Pin No.
Signal Name
I/O
*
Function
1
-
-
Reserved (For the UBA Pro Side)
2
-
-
Reserved (For the UBA Pro Side)
3
M.RES
IN
Acceptor Hard Reset Signal Line
4
TXD
OUT
Output Signal Line from Acceptor to Host
5
-
-
Reserved (For the UBA Pro Side)
NOTE: The Interface setup is required. Refer to “Interface and Recycler Settings (Sub Board 2)” on
page 2-4 for the settings.