![background image](http://html1.mh-extra.com/html/jcm-global/uba-pro-rt-series/uba-pro-rt-series_operation-and-maintenance-manual_3541085114.webp)
© 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2 2
Section 6
UBA Pro RT/RQ™ Series Banknote Recycler
Calibration and Testing
4. Apply electrical power.
5. Confirm that the Status LED/Collect Button is lit
at
Green
Color and then turns off.
6. Remove the Recycler from the RT Transport.
7. Lift the Front Transport Unit.
8. To start the Test, set the UBA Pro DIP Switch #8
to
OFF
9. The Rotary Guide (Figure 6-101
a
) will change
the transport path in 3 directions when it func-
tions properly:
•
A
: UBA Pro to Recycler
•
B
: UBA Pro to Cash Box
•
C
: Recycler to Cash Box.
10. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Note Position Sensor 1 - 3 Test
To run the Note Position Sensor 1 - 3 Test on the
RT Transport side, provceed as follows:
1. Remove electrical power.
2. Set the DIP Switches of the UBA Pro Unit as
below (Figure 6-108).
3. Set the DIP Switches of the RT/RQ Unit as below
4. Apply electrical power.
5. Confirm that the Status LED/Collect Button is lit
at
Green
Color and then turns off.
6. To start the Test, set the UBA Pro DIP Switch #8
to
OFF
NOTE: Wait for the Status LED to turn off
in order to run the test properly.
Figure 6-104
Figure 6-104
Flapper Motor Test (RT Transport) 3
Green
ON
OFF
Figure 6-105
Figure 6-105
Flapper Motor Test (RT Transport) 4
Figure 6-106
Flapper Motor Test (RT Transport) 5
DIP Switch #8 OFF
ON
1
2
3
4
5
6
7
8
Figure 6-107
Figure 6-107
Flapper Motor Test (RT Transport) 6
B
C
a
a
a
Figure 6-108
Figure 6-108
Note Position Sensor 1 - 3 Test 1
DIP Switches #1, #2, #6, #8 ON
ON
1
2
3
4
5
6
7
8
Figure 6-109
Figure 6-109
Note Position Sensor 1 - 3 Test 2
DIP Switch #4 ON
ON
1
2
3
4
5
6
7
8
NOTE: Wait for the Status LED to turn off
in order to run the test properly.
Figure 6-110
Note Position Sensor 1 - 3 Test 3
Green
ON
OFF
Figure 6-111
Note Position Sensor 1 - 3 Test 4
DIP Switch #8 OFF
ON
1
2
3
4
5
6
7
8