![background image](http://html1.mh-extra.com/html/jcm-global/uba-pro-rt-series/uba-pro-rt-series_operation-and-maintenance-manual_3541085042.webp)
Section 2
UBA Pro RT/RQ™ Series Banknote Recycler
Installation
© 2020, JAPAN CASH MACHINE CO., LTD.
2 - 8
RS232C Interface Connector Pin Assignments (UBA Pro Side)
Table 2-7
RS232C Connector Pin Assignments (UBA Pro Side)
Socket (UBA Pro Unit Side): DRA-20PC-FO (JAE)
Contact (UBA Pro Unit Side): D02-22-26P-10000 (JAE)
Socket (Frame Side): DRA-20SC-FO (JAE)
Contact (Frame Side): D02-22-26S-10000 (JAE)
Contact (Frame Side) Pin No.3, No.13: D02-22-22S-10000 (JAE)
Recommended Wires: Slit Wire UL1061 AWG #26
Pin No.
Signal Name
I/O
*
*. I/O (input/output) is the terminal as viewed from the RT/RQ Unit’s side.
Function
1
-
-
Reserved (For the UBA Pro Side)
2
-
-
Reserved (For the UBA Pro Side)
3
M.RES
IN
Acceptor Hard Reset Signal Line
4
TXD
OUT
Output Signal Line from Acceptor to Host
5
-
-
Reserved (For the UBA Pro Side)
6
RXD
IN
Input Signal Line from Host to Acceptor
7
NC
-
No Connection
8
NC
-
No Connection
9
NC
-
No Connection
10
NC
-
No Connection
11
-
-
Reserved (For the UBA Pro Side)
12
NC
-
No Connection
13
GND (I/F)
-
Interface Power Supply (RS232C 0V DC)
14
LED POWER
-
LED Indicator Power Supply Line (Anode)
15
-
-
Reserved (For the UBA Pro Side)
16
NC
-
No Connection
17
-
-
Reserved (For the UBA Pro Side)
18
LED
-
LED Indicator Control Line (Cathode)
19
NC
-
No Connection
20
-
-
Reserved (For the UBA Pro Side)
NOTE: The Interface setup is required. Refer to “Interface and Recycler Settings (Sub Board 2)” on
page 2-4 for the settings.