JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual Download Page 193

Page: 193 / 196

P/N 960-000213R_Rev.A

B - 1

UBA Pro RT/RQ™ Series

Banknote Recycler

A p p e n d i x B

B GLOSSARY

Acceptor

a device used to validate and accept Banknotes, then communicate the acceptance re-
sults to Host Machine... 1-1

Anti-Pullback Mechanism

a mechanism (optical, mechanical, or a combination of both designed) to prevent the
unauthorized retrieving of Banknotes from a Cash Box... 1-7
The rotating drum located in the rear portion of the transport to prevent a Banknote
from being retrieved by an attached piece of string, wire or transparent tape... 1-4

Bezel

a removable Plastic Assembly attached to the front of the Banknote Insertion Slot of an
UBA Pro Unit. It features a rectangular shaped access opening (slot) for easy insertion
and retrieval of Banknotes. Bezels are available in different shapes and sizes in order to
accommodate Banknotes of different widths and different stacking configurations... 1-2

Calibration

a process performed on electronic equipment which ensures that all circuits are proper-
ly aligned and operating at optimum levels. Calibration is accomplished using a soft-
ware based program which checks and sets the operational reference levels for sensors.
This helps to ensure that the Unit operates with the highest Banknote acceptance rate
possible. Calibration is recommended whenever the CPU board, or one of the Sensor
Boards are replaced... 6-1

Centering Mechanism

a mechanical assembly designed to center Banknotes that enter the Acceptor at skewed
angle... 1-4

Checksum

a numerical value assigned to a data file or block of data (usually expressed in Hexa-
decimal notation). Checksum values are used to verify that the contents of a data file
are not corrupted in any way during transmission or encryption. The Checksum values
of both the original and duplicate files are compared to each other. If the values do not
match then it is recommend that the file be copied (uploaded) again until the Checksum

do match.... 6-4

Summary of Contents for UBA Pro RT Series





































































































































































































Search results

Summary of Contents for UBA Pro RT Series

Reviews:

Related manuals for UBA Pro RT Series

Brands by name

Popular brands

JCM GLOBAL UBA Pro RT Series, Operation And Maintenance Manual

Search results

Summary of Contents for UBA Pro RT Series

Reviews:

Related manuals for UBA Pro RT Series

Brands by name

Popular brands