![background image](http://html1.mh-extra.com/html/jcm-global/uba-pro-rt-series/uba-pro-rt-series_operation-and-maintenance-manual_3541085122.webp)
© 2020, JAPAN CASH MACHINE CO., LTD.
6 - 3 0
Section 6
UBA Pro RT/RQ™ Series Banknote Recycler
Calibration and Testing
4. Apply electrical power.
5. Confirm that the Status LED/Collect Button is lit
at
Green
Color and then turns off.
6. To start the Test, set the UBA Pro DIP Switch #8
to
OFF
7. The Drum 1 of the Recycler will start winding
the Tape until it reaches to “End” and then to
“Full” position back and forward repeatedly.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Drum 2 Motor Test (RQ Transport)
To run the Recycler Solenoid on the RQ Transport
side, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches of the UBA Pro Unit as
below (Figure 6-165).
3. Set the DIP Switches of the RQ Unit as below
4. Apply electrical power.
5. Confirm that the Status LED/Collect Button is lit
at
Green
Color and then turns off.
6. To start the Test, set the UBA Pro DIP Switch #8
to
OFF
7. The Drum 2 of the Recycler will start winding
the Tape until it reaches to “End” and then to
“Full” position back and forward repeatedly.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
NOTE: Wait for the Status LED to turn off
in order to run the test properly.
Figure 6-163
Figure 6-163
Drum 1 Motor Test (RQ Transport) 3
Green
ON
OFF
Figure 6-164
Drum 1 Motor Test (RQ Transport) 4
DIP Switch #8 OFF
ON
1
2
3
4
5
6
7
8
Figure 6-165
Drum 2 Motor Test (RQ Transport) 1
DIP Switches #1, #2, #6, #8 ON
ON
1
2
3
4
5
6
7
8
Figure 6-166
Drum 2 Motor Test (RQ Transport) 2
DIP Switches #7, #8 ON
ON
1
2
3
4
5
6
7
8
NOTE: Wait for the Status LED to turn off
in order to run the test properly.
Figure 6-167
Figure 6-167
Drum 2 Motor Test (RQ Transport) 3
Green
ON
OFF
Figure 6-168
Figure 6-168
Drum 2 Motor Test (RQ Transport) 4
DIP Switch #8 OFF
ON
1
2
3
4
5
6
7
8