JCM GLOBAL UBA Pro RT Series, Operation And Maintenance Manual

Page: 84 / 196

P/N 960-000213R_Rev.A © 2020, JAPAN CASH MACHINE CO., LTD.
4 - 2 0
Section 4 UBA Pro RT/RQ™ Series Banknote Recycler Disassembly/Reassembly
Sponge Roller Assy. Removal (Drum 1
Side)
To remove the Sponge Roller Assy. from the Drum
1 Side, proceed as follows:
1. Remove the six (6) Screws (Figure 4-99 a
1
through a
6
) from the Rear Unit.
2. Pull the Course Guide (Figure 4-100 a ) as illus-
trated by the Arrow
①
, and then slide out in the
direction indicated by the Arrow
②
.
3. Slide the Course 1 (Figure 4-101 a ) as illustrated
until it stops.
4. Remove the single (1) Spring (Figure 4-102 a ).
5. Remove the single (1) E-ring (Figure 4-102 b )
and the single (1) Drum Guide RO (Figure 4-102
c ).
6. Remove the five (5) Screws (Figure 4-102 d
1
through d
5
).
7. Lift the Course 1 (Figure 4-103 a ) up as illus-
trated.
8. Remove the single (1) Solenoid Link Plate Assy.
(Figure 4-103 b ) and the single (1) Drum Guide
Roller (Figure 4-103 c ).
9. Remove the single (1) Shaft (Figure 4-104 a ).
10. Remove the two (2) Pulleys (Figure 4-104 b
1
&
b
2
), the single (1) Flapper R (Figure 4-104 c ) and
the single (1) Flapper L (Figure 4-104 d ) to
remove the Sponge Roller Assy. (Figure 4-104
e ).
Figure 4-99 Sponge
Figure 4-99 Sponge Roller Assy. Removal
(Drum 1 Side) 1
a
2
a
3
a
4
a
5
a
6
Drum 1 Side
a
1
Figure 4-100 Sponge
Figure 4-100 Sponge Roller Assy. Removal
(Drum 1 Side) 2
①
②
a
①
②
Figure 4-101 Sponge
Figure 4-101 Sponge Roller Assy. Removal
(Drum 1 Side) 3
a
Figure 4-102 Sponge
Figure 4-102 Sponge Roller Assy. Removal
(Drum 1 Side) 4
d
1
d
2
d
3
d
4
d
5
a
b c
Figure 4-103 Sponge
Figure 4-103 Sponge Roller Assy. Removal
(Drum 1 Side) 5
a
b
c
Figure 4-104 Sponge
Figure 4-104 Sponge Roller Assy. Removal
(Drum 1 Side) 6
c
b
1
b
2
a
d
e