![background image](http://html1.mh-extra.com/html/jcm-global/uba-pro-rt-series/uba-pro-rt-series_operation-and-maintenance-manual_3541085110.webp)
© 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 8
Section 6
UBA Pro RT/RQ™ Series Banknote Recycler
Calibration and Testing
Communication Test
To test the communication between UBA Pro and
RT/RQ Unit, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches of the UBA Pro Unit as
below (Figure 6-72).
3. Set the DIP Switches of the RT/RQ Unit as below
(Figure 6-73).
4. Apply electrical power.
5. Confirm that the Status LED/Collect Button is lit
at
Green
Color and then turns off.
6. To start the Test, set the UBA Pro DIP Switch #8
to
OFF
(Figure 6-75).
7. The UBA Pro
Green
Status LED will turn on
when the UBA Pro Unit is communicating with
the RT/RQ Unit successfully.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Status LED Test
To test the RT/RQ Unit Status LED’s performance,
proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches of the UBA Pro Unit as
below (Figure 6-76).
3. Set the DIP Switches of the RT/RQ Unit as below
4. Apply electrical power.
5. Confirm that the Status LED/Collect Button is lit
at
Green
Color and then turns off.
6. To start the Test, set the UBA Pro DIP Switch #8
to
OFF
7. Press the RT/RQ Unit’s Status LED/Collect
Button.
8. Confirm that the Status LED is lit in the follow-
ing sequential order each time when pressing the
Status LED/Collect Button:
Green
=> Magenta
=> Cyan
=> Blue
=> Yellow
=> Red
=> White
=>
OFF
9. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Figure 6-72
Communication Test 1
DIP Switches #1, #2, #5, #8 ON
ON
1
2
3
4
5
6
7
8
Figure 6-73
Communication Test 2
DIP Switches All OFF
ON
1
2
3
4
5
6
7
8
NOTE: Wait for the Status LED to turn off
in order to run the test properly.
Figure 6-74
Communication Test 3
Green
ON
OFF
Figure 6-75
Communication Test 4
DIP Switch #8 OFF
ON
1
2
3
4
5
6
7
8
Figure 6-76
Figure 6-76
Status LED Test 1
DIP Switches #1, #2, #5, #8 ON
ON
1
2
3
4
5
6
7
8
Figure 6-77
Figure 6-77
Status LED Test 2
DIP Switch #5 ON
ON
1
2
3
4
5
6
7
8
NOTE: Wait for the Status LED to turn off
in order to run the test properly.
Figure 6-78
Figure 6-78
Status LED Test 3
Green
ON
OFF
Figure 6-79
Figure 6-79
Status LED Test 4
DIP Switch #8 OFF
ON
1
2
3
4
5
6
7
8