Janssen F Series, Operating Instructions Manual

Page: 87 / 315

85
1. 3.
4.
2.
The rear (
1
) sheet sensor in the
machine detects the baking sheet (
2
)
and starts the conveyor drive.
When the baking sheet passes the
front sheet sensor (
3
) and arrives at
the front transfer edge of the upper
conveyor belt, the sheet transport
stops and the upper conveyor belt
transports the formed cookies to the
baking sheet. When the first cookie
has arrived at the dough sensor (
4
),
both the conveyor belt and the sheet
transport run and load the baking
sheet until the sheet is completely
covered with cookies and the machine
stops.
If another sheet is inserted at the
back, the machine starts and the
cycle begins again.
Your advantage:
This mode allows convenient operati-
on of the machine with only one
person.
Caution: The dough sensor must
be correctly adjusted! It must be
positioned about 2 mm above the
dough.
(
see section "9.15 Setting the
sheet sensors", p. 77
).