Janssen F Series, Operating Instructions Manual

Page: 72 / 315

70
9.6 Adjusting the sheet guide
The sheet guides on the left and right
can be installed and removed very
easily on the side rails of the sheet
transport by means of a clip mecha-
nism. The wing screws can be used to
adjust the guide plates with precision.
(
Section "11.4.1 Installation and
removal of the sheet guide", p. 132
).
9.7 Height adjustment of the sheet transport unit
Depending on the height of the baking sheet, the sheet transport unit can be
adjusted so that it can be transported under the cookie transfer point of the
upper conveyor belt at the optimum height.
The handle must be pulled out axially
and turned to the desired position.
The drop height of the cookies should
be as low as possible so that the
cookies do not tip over upside down.
High
Downwards
High
sheets
Flat sheets