Janssen F Series, Operating Instructions Manual

Page: 243 / 315

15
L
R
–
3.1.2 Set biscuits thinner on the right side:
To set the biscuits thinner on the right side (
R
), loosen the
locking screw and turn the bearing rim marked in red (see
illustration below) clockwise by a few angular degrees and
fix it by means of the locking screw..
Goal:
The biscuits must be exactly the same thickness on the
left (
L
) and right (
R
) in the direction of shaping!
rotatable
Bearing ring
Locking screw
–
by turning clockwise, the distance
between the knife shaft with the knife to
the kneading roller is increased and thus
the biscuit is cut thinner