Janssen F Series, Operating Instructions Manual

Page: 74 / 315

72
9.9 Adjusting the straight running of the upper conveyor belt
The straight running of the upper conveyor belt (
1
) can be adjusted with the adjusting wheel (
2: belt running adjustment
).
If the wheel is turned to the left, the belt also moves to the left. If the wheel is turned to the right, the belt also moves to
the right. For fine adjustment, the wheel only needs to be turned in the range of a quarter turn.
If the belt cannot be adjusted, remove the belt and remove from the drive roller any dough residue that has settled on
the drive shaft (
3
) and deflection axle (
4
). After cleaning, the belt should be adjustable again.
The design of the tensioning mechanism prevents the belt from being over tightened* ( *) the use of Jannssen conveyor
belts is a prerequisite for proper functioning!)
If the belt has damaged areas, please replace the belt promptly, as the damaged areas can cause hygienic defects.
3
2
1
L
R
BANDREGULIERU
NG /
EASY BELT REGU
LATION
2
1
4
3